I have installed vSphere Replication 8.3 vCenter 6.7. I am getting the following error: "vSphere Replication - UI error: Unknown error." I have been searching for anything pertaining to this error or where to look to see what might be causing this error with no luck.
Can someone point in the right direction?
1.
Using the latest 15.5.6, internet connections do work but connectivity bugs make the VM nearly unusable... I can access the internet via browsers, but initial connections to each website take 30-60 seconds to accomplish.
Update: fixed, I switched from NAT to bridged and the problem was fixed, the nat is really buggy.
2.
Accessing the terminal window in Lubuntu 19.10 also is buggy, the window bar is missing at the top, and attempts to click the bar at the top right cause the window to crash. I am using default I made a video of the event here:
Vmware slow internet & VirtualMachine GUI bugs 2020-07-03 19-46-02 on Vimeo
When I connect my esxi host by remote location give no peer certificate found
I'm running VMware Workstation Player 15 on a Win7 host. I'm trying to use an Ubuntu 16.04LTS client to do partitioning, cloning, and other related things on disks. I was able to create a bunch of partitions on a blank SSD, and they're visible both in Windows Disk Management, and under Linux in the /dev tree. When I try to use the dd command to try to copy an existing partition on an old drive over the empty partition on the new drive, which has the same size, I can't write to it at all, because I get popups from the VM with the message mentioned in the title. Neither drive is mounted in Linux. I've tried it with the drives online and offline in Windows, and it makes no difference.
I can do this stuff by just booting direct to Linux (meaning there's nothing wrong with the disks), but I need to go back and forth between Linux and Windows tools, and repeatedly rebooting makes my work really difficult.
So what does this error message mean, what causes it, and what do I do about it?
Hello,
Here's my setup:
Pc with Windows 10 Enterprise,
VMWARE Workstation Pro latest (Version 15.5.5 Build 16285975),
Visual studio 2019 MFC cpp.
I've developed an app with Visual studio 2019 with MFC and C. This app only says "Hello." This app is unsigned. On my PC with VMWARE Wokstation Pro I created two Virtual Machine. The first under Windwos 10 Enterprise and the other on Windows server 2019.
I copy my app on the desktop of each VM.
I have two different behaviors when I launch my app:
On windows server 2019, Windows reports that my app has no author. It's a consistent response (runtime antivirus, blue screen).
In Windows 10 (VM) my app launches without a problem.
When I launch my app on my wife's PC I have the only behavioral mem in the Windows VM server 2019. Which is cohesive.
So my question is why this difference?
Hi,
I am running VMWare 15.5.6 on Linux mint(Ubuntu) 20.04. When I try to run any host operating system(tried with linux and windows) I am getting the above mentioned error. I did uncheck the 3d acceleration and made no difference. I have attached the log. Can you please help me out?
I get an error every time I try to create a new user. At first I didn't think much of this, but now it's stopping me from joining a vCenter server as it wants to create or modify the vpxuser account.
When I go to create a new user I receive the error "Failed - A general system error occurred: passwd: Permission denied". The only account I have at the moment is "root", so that's what I'm doing this from.
This is a clean install using the Dell customised ISO (ie it has the Dell drivers I need built in). When I enable ssh and ssh in to the host using the root and run passwd I get "Permission denied".
I cannot try this from any other accounts as I cannot create any accounts to try this from.
As stated above, this is making it so I can't join the new host to a vCenter server.
Hello,
Kernel module compilation gives following error:
Log for VMware Workstation pid=XXXX version=15.5.6 build=build-16341506 option=Release
The process is 64-bit.
Host codepage=UTF-8 encoding=UTF-8
Host is Linux 5.3.18-lp152.19-default openSUSE Leap 15.2 openSUSE Leap 15.2
/tmp/modconfig-BOu4BL/vmnet-only/userif.c: In function ‘VNetCsumCopyDatagram’:
/tmp/modconfig-BOu4BL/vmnet-only/userif.c:85:39: error: ‘skb_frag_t {aka const struct bio_vec}’ has no member named ‘page_offset’; did you mean ‘bv_offset’?
# define skb_frag_off(frag) (frag)->page_offset
^
/tmp/modconfig-BOu4BL/vmnet-only/userif.c:576:43: note: in expansion of macro ‘skb_frag_off’
tmpCsum = csum_and_copy_to_user(vaddr + skb_frag_off(frag),
^~~~~~~~~~~~
Can I solve it on my own or is there allready a fix?
Best regards,
Jan
Win10 vmware starts a certain virtual machine, sometimes the black screen is sometimes normal, the black screen cannot be forcibly closed by the task manager, and it is normal to open other virtual machines.
Hi all, I just found that the VMware's debugStub feature does not work on Windows 10 2004, Hyper-V enabled pc.
I enable the VirtualMachinePlatform on Windows 10 2004 to enable the wsl2 and install VMware 15.5.6 build-16341506.
It seems to work perfectly with the Hyper-V, but there's a problem with debugStub.
VMware does not make a listen-socket, so I cannot connect to the guest OS.
There is no log about the debugStub on the vmware.log file.
When I disable the VirtualMachinPlatform feature, VMware's debugStub feature works fine.
It creates the listening socket, and it is possible to connect to the guest OS.
Is there any plan to support the debugStub feature on Hyper-V enabled machine? or is it technically impossible to use debugStub feature on Hyper-V-enabled machine?
Hello,
talking about vROPS 8.1...
I need to insert the current date (Date + time) in a view field.
Surely in the produced pdf there is the date for the report running, but I need the same (current) date as field in each record of the output CSV file.
Any idea?
Is it possible to set a different default filename format (adding hour and minute) for the pdf/csv exported for reports produced?
Any help highly appreciated.
Thanks and kind regards
Zampo
My 64-bit Windows virtual machines does not boot up when created before 15.5 is installed and Hyper-V is enabled. These 64-bit machines are stuck in a boot loop and I cannot get to the desktop.
I want to move the vCenter from ESXi-1 host to ESXi-2 due to the memory limitations. In the ESXi-1 console I don't see any clone or migration option.
Is that possible then?
I have a problem I have two dell server R210 and R810 I would like to install vmware server esxi there but always get unsupport cpu intel family 0.06 model stepping 0.5 ?
I tried install Windows in VMware Workstation Pro 15.5 and have long client system hangs.
Probably the problem is here:
```
2020-03-10T02:15:51.308+06:00| vmx| I125: scsi0:1: Command WRITE(10) took 297.577 seconds (ok)
2020-03-10T02:15:51.308+06:00| vmx| I125: scsi0:1: Command WRITE(10) took 297.571 seconds (ok)
2020-03-10T02:15:51.308+06:00| vmx| I125: scsi0:1: Command WRITE(10) took 297.570 seconds (ok)
```
Full log with enabled debug mode in attachment.
Host system:
kernel: 5.5.8
vmware build: 14665864
storage: installed to just NVMe or just HDD
tried to use different formats: scsi, ide, sata
need any additional info?
Thanks.
We've moved two VM's (same hardware same software - Windows 7 as OS) from one esx server to another.
We access those VM from VM Workstation Pro's.
Since we moved those VM's we receive on one of those machines daily this error.
Any advice?
For versions of VMWare Workstations 12 thru 15, Troubleshooter Program reports "Incompatible Program"
Host is WIN 10 Pro 64 Bit Version 1909
C Drive is am SSD
Installing to F Drive
Error installing Workstation 15
Setup cannot continue. The Microsoft Runtime DLL installer failed to complete installation
Some months ago, I configured an smtp in the vcenter configuration settings. Now, that I want to modify the mail server, it doesn't work. Right now, I want to know
1) How can I query smtp configurations via shell (bash) commands in vcenter?
2) I see this entry in one of the sendmail config files.
root@10 [ /etc ]# grep -r XXX.edu .
./mail/sendmail.cf:DS[mail.XXX.edu:465]
where XXX is the old mail server. I can not find that XXX in the vcenter web interface. What is that?
Hello everyone,
I'm facing an issue where the VMware Tools Setup window ( http://prntscr.com/tbstwu )isn't appearing after launching the program. All it asks for is administrator permission and nothing happens afterwards! Any help would be great!!!
I see that iWork does not work in a Fusion MacOS guest. I get the impression that this is due to a lack of video support in the VMware Tools? What is the plan here?